
Blog
EXTREMA RATIO: Maintenance and Care

Basic Rules
Keep the knife clean, dry, and lubricated.
Use dedicated synthetic lubricants (including gun oils): apply sparingly, but thoroughly.
Environment
Salt water: rinse with fresh water, dry thoroughly, and lubricate. (Salt is the enemy.)
Fresh water / mud: rinse, dry, and lubricate.
Grease and stubborn dirt: use household detergent, then dry and lubricate.
Sheath: keep the inside clean. Sand and abrasive debris can scratch the blade during sheathing/unsheathing.
FIXED-BLADE KNIVES
Handles, rigid sheaths, and straps are made from high-strength materials.
Screws and metal components are engineered to minimize oxidation.
The blade requires the most attention, even with surface coatings: coatings can wear off with use.
This is normal. It just means the knife is doing its job.
FOLDING KNIVES (POCKET KNIVES)
The blade requires the most care, even when treated or coated.
We recommend cleaning and lubricating with cotton swabs and small brushes, without disassembling the knife.
Frequent disassembly can damage the components and compromise assembly quality.
KITCHEN KNIVES
When used properly, they hold their edge for a long time.
Avoid striking the cutting edge against hard materials (metal, stone, glass).
Sharpening should only be done by experienced users or professional sharpeners.
Do not wash in the dishwasher. Use with extreme care.
NON-ROUTINE MAINTENANCE
In case of wear or damage, individual parts can often be replaced without having to replace the entire product.
Wearable parts can be replaced.
Severely damaged edges should be restored by the manufacturer or an authorized professional.
SHARPENING
Sharpen using natural stones or diamond plates, with quality tools and the appropriate grit:
coarse grit for repairs and major blade restoration
fine grit for maintenance and finishing
Basic rule: maintain the correct geometry and work the edge with controlled strokes.
FAQ — MAINTENANCE AND CARE
- After cleaning and always after exposure to water, mud, or moisture.
- It's better to apply a little often than a lot rarely.
- Clean → dry completely → lightly lubricate.
- Use synthetic lubricants designed for firearms. Just a few drops, evenly spread.
- Rinse with fresh water (immediately).
- Dry thoroughly (including hard-to-reach spots).
- Lubricate.
- Remember: salt is aggressive and speeds up oxidation.
- Avoid taking it apart. Clean and lubricate using cotton swabs and small brushes without disassembling it.
- Repeated disassembly can damage the components and assembly quality, and may void the warranty.
- A dedicated synthetic lubricant. Use a very small amount.
- Too much lubricant traps dirt and dust. The goal is protection and smooth action, not smothering it in grease.
- Yes. Surface coatings can wear off with use.
- It's not a defect; it's a sign of use. Proper maintenance protects the blade and keeps it performing well.
- It's almost always caused by sand or abrasive debris inside the sheath.
- Clean the inside regularly to clear out dirt and grit.
- Maintain the correct geometry. (angle)
- Use coarse grit only for damage or major edge restoration; use fine grit for maintenance and finishing.
- Controlled strokes, steady pressure.
- When a component is worn out or damaged.
- Often, an individual part can be replaced without replacing the entire product.
- For severely damaged edges: get them restored by the manufacturer or an authorized professional.
- Clean, dry, and apply a light coat of oil.
- Store it in a way that prevents moisture from getting trapped, and check on it periodically.